TP-Link AC1200 Extender Setup Process

Does the TP-Link AC1200 extender setup process too much for you? Don’t know where and how to start? Don’t worry! We have come to your rescue. This post is the only guide you need to perform the TP-Link AC1200 extender setup via different methods. After reading this post, you can easily set up your TP-Link extender and enjoy a seamless home WiFi network.

So, let us learn about different extender setup methods. Following that, you can use the one that seems easy and more efficient. Read on.

TP-Link AC1200 Extender Setup: Manual Method

The manual method makes use of a web browser. Further, the web interface is another name for the manual method. So, get hold of a working web browser if you wish to use this method to perform the repeater setup process.

Set Hardware

To set up TP-Link AC1200, you need to first get the device out of the box. When you do so, make sure the device is not damaged. Also, don’t forget to get hold of the repeater antennas and the Ethernet cable.

In case the device is physically damaged, you need to get the repeater replaced.

Placement of Repeater

The placement of the TP-Link range extender will be the next step. Thus, explore your surroundings to know which could be the best location for repeater placement. Make sure you don’t choose a place under or close a window.

Moreover, the location should be high and away from WiFi interference causing devices and objects.

Connection with Router

To permit the repeater access to the internet, you need to connect the TP-Link AC1200 extender with the host router. You can establish a connection by using two methods. At first, a wireless connection seems convenient. However, it suffers from fluctuations.

Therefore, we recommend you go for the wired connection.

Open System

The setup process requires you to do a TP-Link extender login first. That is where you will need a computer or a laptop. Therefore, you must plug in your computer to a power socket and hit the power button. If the computer fails to start, push the start button on your computer.

While using a laptop, we advise you to keep a working laptop charger by your side.

Launch Internet Browser

Once you have a stable computer or laptop, open a web browser. But, you must only go ahead with an updated internet browser. Don’t have one? Relax! You can always download a compatible and an up to date web browser on your computer.

In case you are using an old but updated web browser, clean its cache and cookies.

Do Login

Enter the TP-Link AC1200 extender default URL in the web browser. Hit the Enter key. You get redirected to the repeater login page. That is where you are going to enter the repeater login details. Make sure you have the right credentials.

Disable the Caps Lock key when you enter the login credentials to minimize errors.

Follow Instructions

You get access to the TP-Link AC1200 extender setup wizard once you hit the Log In button. Thus, you have access to all the repeater wireless settings. If you change something, hit the Apply button. After that, you can move through the online instructions to complete the setup.

It concludes the TP-Link extender setup using a web browser. For the WPS method, you should read the following points.

TP-Link AC1200 Extender Setup: WPS Method

The WPS button configuration is successful only when your host router is compatible with the WPS configuration. Otherwise, you will have to use the manual method only.

Conclusion

Mistakes are bound to happen during the TP-Link AC1200 extender setup process. If the issues are not resolved, you might face tplinkrepeater.net not working. Hence, get rid of the issues hampering the setup process first. After eliminating the causes and reasons, the installation is easy to execute. After that, you can enjoy a seamless internet connection in your house.